European Commission 24 October 2013, Commission Delegated Regulation (EU) No 3/2014 of 24 October 2013 supplementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to vehicle functional safety requirements for the approval of two- or three-wheel vehicles and quadricycles Text with EEA relevance

Also known as

European Union · · · Cited by 115 · 24-10-2013

CHAPTER I. SUBJECT MATTER AND DEFINITIONS
Article 1. Subject matter
Article 2. Definitions
CHAPTER II. OBLIGATIONS OF MANUFACTURERS
Article 3. Fitting and demonstration requirements related to functional safety
Article 4. Application of UNECE regulations
Article 5. Technical specifications on functional safety requirements and test procedures
Article 6. Requirements applying to audible warning devices
Article 7. Requirements applying to braking, including anti-lock and combined braking systems if fitted
Article 8. Requirements applying to electrical safety
Article 9. Requirements applying to the manufacturers’ declaration regarding endurance testing of functional safety critical systems, parts and equipment
Article 10. Requirements applying to front and rear protective structures
Article 11. Requirements applying to glazing, windscreen wipers and washers, and defrosting and demisting systems
Article 12. Requirements applying to driver-operated controls including identification of controls, tell-tales and indicators
Article 13. Requirements applying to the installation of lighting and light signalling devices, including automatic switching of lighting
Article 14. Requirements applying to rearward visibility
Article 15. Requirements applying to the roll-over protective structure
Article 16. Requirements applying to safety belt anchorages and safety belts
Article 17. Requirements applying to seating positions (saddles and seats)
Article 18. Requirements applying to steer-ability, cornering properties and turn-ability
Article 19. Requirements applying to the installation of tyres
Article 20. Requirements applying to the maximum vehicle speed limitation plate and its location on the vehicle
Article 21. Requirements applying to vehicle occupant protection, including interior fittings and vehicle doors
Article 22. Requirements applying to maximum continuous rated and/or net power and/or vehicle speed limitation by design
Article 23. Requirements applying to vehicle structure integrity
CHAPTER III. OBLIGATIONS OF THE MEMBER STATES
Article 24. Type-approval of vehicles, systems, components and separate technical units
CHAPTER IV. FINAL PROVISIONS
Article 25. Entry into force
ANNEX I. ANNEX II

10.1.2014

Official Journal of the European Union

L 7/1

COMMISSION DELEGATED REGULATION (EU) No 3/2014

of 24 October 2013

supplementing Regulation (EU) No 168/2013 of the European Parliament and of the Council with regard to vehicle functional safety requirements for the approval of two- or three-wheel vehicles and quadricycles

(Text with EEA relevance)

THE EUROPEAN

Read the full text

This document is published by eur-lex.europa.eu.

Moonlit adds the citation network (115 references), article-level links and cross-references, which are available to search for free.